barriers. <br />2.Physical conditions preclude locating the access connection on the street <br /> <br />with the lower classification. Such conditions may include, but are not limited <br />to, topography, trees, existing buildings or other existing development on the <br />subject property or adjacent property. <br />3.The access connection for a parcel with frontage on an arterial or major <br /> <br />collector can be located consistent with the requirements of EC 7.420(2)(a)-(e) <br />The applicant is proposing to adjust this standard, which is evaluated further in EC 7.420(2) below. <br /> <br /> <br /> (d) Access connections located within five feet of an existing alley connection may <br />be merged with the alley pavement. The combined connection width shall not <br />exceed 35 feet. A public access easement shall be recorded and submitted to the <br />city upon issuance of a permit to construct the access connection. <br />This standard is not applicable as there are no proposed accesses adjacent to an alley. <br /> <br />(2) Access Connections to Arterial and Major Collector Streets. <br />(2) Access Connections to Arterial and Major Collector Streets. In addition to the <br />standards set forth in this EC 7.420(1), access connections to arterial and major <br />collector streets shall be located in accordance with the following standards. <br />(a) Except when an existing lot or parcel is located entirely within the <br />intersection influence area, no access connection to an arterial or major <br />collector street shall be located within the intersection influence area. If <br />an existing lot or parcel is located entirely within the intersection <br />influence area, an access connection, of minimum width, onto an arterial <br />or major collector street will be permitted provided the access connection <br />is located along the property line furthest from the intersection. <br />(b) Access connections shall be spaced based on the street classification as set <br />out in the chart \[200Major Arterial streets\]. The spacing area shall be <br />measured from the edge of one access connection to the leading edge of <br />another access connection. <br />(c) Access connection spacing requirement s will be reduced up to a maximum <br />of 50% of the required spacing, upon applicant request, if: <br />1.Both of the following conditions are met: <br /> <br />a. The proposed access connection is abutted by two or more <br />directional travel lanes or an auxiliary deceleration lane; and <br />b. The applicant proposes a restricted movement access connection, <br />including but not limited to median barriers or directional in/out <br />barriers. <br /> (d) Applicant with an existing lot or parcel as of April 10, 2010, that cannot <br />meet the spacing requirement, does not qualify for a reduction in the <br />spacing requirements, and has no other access to the lot or parcel, will be <br /> <br />SR 18-03 Lombard Apartments PW Referral Page 6 of 9 <br /> <br />