My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Application Materials
>
OnTrack
>
CU
>
2014
>
CU 14-3
>
Application Materials
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/9/2014 10:49:48 AM
Creation date
5/1/2014 8:24:03 AM
Metadata
Fields
Template:
PDD_Planning_Development
File Type
CU
File Year
14
File Sequence Number
3
Application Name
CINGULAR WIRELESS
Document Type
Application Materials
Document_Date
5/1/2014
External View
Yes
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
74
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
5. A statement providing the reasons for the location, design and height <br />of the proposed tower or antennas. <br />Response: AT&T is experiencing a significant 4G LTE coverage gap in south Eugene. The <br />installation of the proposed monopine at Fox Hollow Road and West Amazon Drive will fill this <br />gap and, in conjunction with adjacent sites, provide adequate voice and data coverage to the <br />south Eugene area. See above at Section IV: Site Selection for a detailed explanation of AT&T’s <br />site and design selection process. See also Attachment 11: RF Coverage Maps. <br />(7) Standards for Transmission Towers and Antennas. Installation, construction or <br />modification of all transmission towers and antennas shall comply with the <br />following standards, unless a variance is obtained pursuant to the provisions of <br />subsection (9) of this section: <br />(a)Separation betweenTransmission Towers. No transmission tower may <br />be constructed within 2000 feet of any pre-existing transmission tower. <br />Tower separation shall be measured by following a straight line from the <br />portion of the base of the proposed tower which is closest to the base of <br />any pre-existing tower. For purposes of this paragraph, a tower shall <br />include any transmission tower for which the city has issued a <br />development permit, or for which an application has been filed and not <br />denied. Transmission towers constructed or approved prior to February <br />26, 1997 may be modified to accommodate additional providers <br />consistent with provisions for collocation in this section. <br />Response: There no registered towers within 2000 feet of the site proposed herein per a search <br />completed on the FCC’s Antenna Structure Registration website at <br />http://wireless.fcc.gov/antenna/index.htm?job=home. <br /> (b) Height Limitation: Transmission tower heights shall be governed by this <br />section except as provided for below. No transmission tower shall exceed <br />the maximum heights provided below. In no case shall a variance be <br />granted from the limitations of subparagraphs (1) through (4) below. <br />1. In any zones, no transmission tower shall exceed the height <br />limitations established for buildings and structures in the specified <br />areas surrounding Skinner Butte contained in EC 9.6715 Height <br />Limitation Areas of this land use code to protect views to and from <br />Skinner Butte. <br />2. In any zone within the area east of Willagillespie Road, south of Cal <br />Young Road, west of Oakway Road, and north of Southwood Lane and <br />Country Club Road, no transmission tower shall exceed 75 feet in <br />height to protect views to and from Gillespie Butte. <br />Site ID: EG46 Fox Hollow & Amazon RoadPage 12of 22 <br />
The URL can be used to link to this page
Your browser does not support the video tag.