The URL can be used to link to this page

Home My WebLink AboutApplication MaterialsANNEXATION DETERMINATION www.eugene-or.gov/planning Planning & Development Updated May 2024 Planning Division 99 W. 10TH Avenue Suite 290, Eugene, OR 97401 Phone: 541.682.5377 or E-mail: planning@eugene-or.gov Page 1 of 2 Please complete the following information. Note that additional information may be required upon further review in order to adequately address the applicable criteria for approval. If you have any questions about filling out this application, please contact Planning staff at the Permit and Information Center, phone (541) 682-5377, 99 West 10th Avenue, Eugene. Map Tax Lot Zoning Acreage Property Address/Location:____________________________________________________________________________ Pending Building Permit or Land Use Application number(s):_________________________________________________ Submit a detailed written description describing the existing and the proposed development (including square footage, use, addition to exiting building or new building, etc.) Submit detailed site plan(s) showing both the existing and proposed development. Is this for a new building/development? Yes No If yes, what kind of building is currently located on the site (i.e. single family home, commercial, industrial): Single Family Commercial Industrial Other:________________________________ Is there an existing building on site or new building? Yes No Is this an addition to a current building on site or a new building? Yes No What is the square footage of the existing building?_________________________________________________________ What is the square footage of new proposed building?_______________________________________________________ What is the square footage of addition to existing building?___________________________________________________ Is the property currently connected to water?______________________________________________________________ Is new water hookup required? (i.e. bathrooms, irrigation, hose bibs, fire hydrant, etc.)? Yes No Is the building currently connected to wastewater? Yes No Will the new building need to hook up to new wastewater? Yes No Describe or show the location of the closest public wastewater/water lines. For more information, contact Public Works Engineering staff at 541-682-8400 or cewepic@ci.eugene.or.us (a) (b) (c) www.eugene-or.gov/planning Planning & Development Updated May 2024 Planning Division 99 W. 10TH Avenue Suite 290, Eugene, OR 97401 Phone: 541.682.5377 or E-mail: planning@eugene-or.gov Page 2 of 2 By signing, the undersigned certifies that he/she has read and understood the submittal requirements outlined, and that he/she understands that omission of any listed item may cause delay in processing the application. I (We), the undersigned, acknowledge that the information supplied in this application is complete and accurate to the best of my (our) knowledge. OWNER (Also the Applicant? Yes / No): Name (print): ____________________________________________ Phone: ___________________________________________ Address: ___________________________________________________________________________________________________ City/State/Zip: _______________________________________________________________________________________________ Signature: ___________________________________________________________________________________________________ APPLICANT (Check one): Name (print): ________________________________________________________________________________________________ Company/Organization: _______________________________________________________________________________________ Address: ____________________________________________________________________________________________________ City/State/Zip: ___________________________________________ E-mail (if applicable): ________________________________ Phone: _________________________________________________ Fax: ______________________________________________ Signature: ___________________________________________________________________________________________________ / DESIGNATED CONTACT PERSON (Check all that apply): Name (print): ________________________________________________________________________________________________ Company/Organization: _______________________________________________________________________________________ Address: ____________________________________________________________________________________________________ City/State/Zip: ___________________________________________ E-mail (if applicable): ________________________________ Phone: _________________________________________________ Fax: ______________________________________________ Signature: ___________________________________________________________________________________________________ Note: This is not a complete list of requirements. Additional information may be required after further review in order to adequately address the applicable approval criteria. EUGENE-SPRINGFIELD PHILOMATH 310 5th Street, Springfield, OR 97477 | p: 541.746.0637 | www.branchengineering.com October 27, 2026 ANNEXATION DETERMINATION BURN TABLE AND BAG HOUSE 29414 AIRPORT ROAD (TM 17-04-08, TL 102) Branch Engineering Inc. Project No. 26-264 This application proposes a new burn table, an equipment platform, and two bag houses. The burn table cuts metal pieces for assembly in other areas and replaces an existing burn table. The air from the burn table area is collected and directed to the paired bag houses where it is treated before being released. Support equipment, such as electrical infrastructure, will be on a cantilevered equipment platform above the burn table to reduce clutter on the manufacturing floor. Currently there is one burn table with an older bag house and no equipment platform. The new equipment will improve efficiency through the use of new cutting technology and improve air quality for the employees. The burn table and bag house will be installed at 29414 Airport Road; this is part of a larger industrial site also addressed as 29394 and 29408 Airport Road (Tax Map 17-04- 08, Tax Lots 101, 102 and 300). Peterson Pacific Corporation, an ASTEC Industries company, is a manufacturer of large equipment that specializes in the processing of forest products. The 20-acre site is currently developed with two primary office/manufacturing buildings and several smaller, accessory buildings used for storage, manufacturing and shipping. The site also contains employee parking and outdoor storage areas. Based on the below criteria, annexation is not required prior to implementation of the above-described project. EC 9.4650 Industrial Corridor Annexation Agreement 1. Property owner execution of the Annexation and Urban Services Agreement, Exhibit C to the April 25, 1991 Annexation and Urban Services Policy Agreement between the Industrial Corridor Community Organization and the City of Eugene, consenting to annexation to the city of the entire development site will be required for the following: a. Any land divisions when lots or parcels created will be less than the minimum parcel sizes specified for the lots or parcels prior to the land division. The applicant is not requesting approval of a land division. Therefore , this criterion is not applicable. Annexation Determination October 27, 2026 Branch Engineering, Inc. Page 2 of 2 b. Any zone change or planned unit development approval. The applicant is not requesting approval of a zone change or planned unit development. Therefore, this criterion is not applicable. c. Any development permit for a new land use or a reconstruction, conversion, alteration, relocation or expansion of an existing use, if the proposed use will generate, singly or in the aggregate, any additional need for an urban facility or service of a type then supplied to any user by the city. This criterion applies because the burn table, equipment platform, and bag houses will require a building permit for installation which could be interpreted as an expansion of the existing industrial development. However, the burn table, equipment platform, and bag houses are not expected to generate a direct additional need for key urban facilities and services provided by the city. The burn tables will be fully contained within the existing 50,990 square foot building. The bag houses will be uncovered outside near the southeast corner of the existing building. It is not yet determined if they will be on the south or east side of the building. The only utility connections for the burn table and bag houses are electric and propane which are provided by EWEB and either Airgas or R&D Propane, respectively, (as opposed to provided by the city). No additional staffing will be generated since the burn table replaces an existing burn table and the bag houses are not a direct part of the manufacturing process. The bag houses will be constructed in an area that is currently paved with asphalt. Since the bag houses will not result in an increase of the site’s impervious area, new stormwater facilities are not necessary. Based on the above information it can be determined that the proposed burn table, equipment platform, and bag houses will not generate an additional need for city services. The applicant is not aware of any additional urban facilities or services that would be potentially impacted by the proposed project.