Prior to final PUD approval, Sheet A-1 shall be revised to include the following note. <br />"The transmission tower and attached antennas shall be unpainted galvanized steel or <br />painted neutral colors or shades with a matte finish as approved by the city." <br />(j) Viewshed. The transmission tower shall be located down slope from <br />the top of a ridgeline so that when viewed from any point along the <br />northern right-of-way line of 18th Avenue, the tower does not interrupt <br />the profile of the ridgeline or Spencer Butte. In addition, a transmission <br />tower shall not interrupt the profile of Spencer Butte when viewed <br />from any location in Amazon Park. Visual impacts to prominent views <br />of Skinner Butte, Judkins Point, and Gillespie Butte shall be minimized <br />to the greatest extent possible. Approval for location of a transmission <br />tower in a prominent view of these Buttes shall be given only if <br />location of the transmission tower on an alternative site is not possible <br />as documented by application materials submitted by the applicant, <br />and the transmission tower is limited in height to the minimum height <br />necessary to provide the approximate coverage the tower is intended <br />to provide. <br />The tower is located in an area that is restricted in height to 75 feet, both by the zone (R-1) and <br />being within view of Gillespie Butte and Skinner Butte per the standard at (7)(b)(2) above. <br />Impacts to the views of Skinner Butte and Gillespie Butte have been minimized with the <br />proposed location as the existing vegetation to the west of the tower already obscures the <br />views behind the tower location. <br />As noted above, the applicant has documented that alternative sites have been evaluated and <br />the tower is the minimum height necessary to provide the intended coverage. <br />(k) Display. No signs, striping, graphics or other attention getting devices <br />are permitted on the transmission tower or ancillary facilities except for <br />warning and safety signage with a surface area of no more than 3 <br />square feet. Such signage shall be affixed to a fence or ancillary facility <br />and the number of signs is limited to no more than 2. <br />The applicant's written statement notes that only FCC standard signs shall be placed on the <br />equipment shelter. To ensure continued compliance with this standard, the following condition <br />is warranted: <br />'Prior to final PUD approval, Sheet A-2 shall be revised to include the following note "No <br />signs, striping, graphics or other attention getting devices are permitted on the <br />transmission tower or ancillary facilities except for warning and safety signage with a <br />Hearing Official Decision (PDT 10-2, CU 11-1) 39 <br />